Millipede Cocktail
Table
11/23/01
Done:
Brought it into the workshop.
Removed the control panel overlays
Sanded, primed and painted control panels
Removed legs, sanded. primed and painted
Purchased new control panel overlays from Arcade Shop.
Removed top glass clips, sanded, primed and painted.
Cleaned trackballs and installed new roller kits purchased from "The Real Bob Roberts"
12/05/01
October 2002:
|
Repaired and cleaned the monitor |
|
| Drilled out the rusted-in feet and re-tapped the holes | |
| Added new leg levelers and end caps |
|
| We put the new control panel overlays on the control panels. We then reinstalled the trackballs and buttons. |
|
| Reassembled the game | |
| Adjusted the monitor | |
| Cleaned the coin mechanisms | |
| Replaced burnt-out bulbs |
|
| Replaced some faulty opto PCBs in the trackballs | |
| Replaced old plug with a new grounded plug |
|
Here are some screen shots from this game.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Send us email to: appolo@appolo.com
Return to APPOLO's Arcade
© Copyright 2001, APPOLO.COM, all rights reserved
