Multi-Pac Project

Multi-Pac Cabinet
05/13/00

Multi-Pac Marquee

This cabinet was originally a Pac-Man. Then it was an Arkanoid. Soon, it will be Multi-Pac.

Another shot of what was done to the poor thing

TRYING to strip the cabinet

Step 1: Remove the hardware, stickers, T-Molding, and strip off the paint. This is really stubborn, thick paint.

Sanded Stripped and ready

Step 2: Strip and sand off the paint. We removed as much paint as we could. We also wiped down the cabinet to remove any loose particles.

Primer Primer

Step 3: Primer. We also bought a Pac-Man control panel at this point. It has to be refinished but is complete.

Multi Pac painted

Step 4: Painted inside the monitor area black and the outside blue to match the colors (almost) in the monitor glass. These pictures make the blue look lighter than the cabinet actually is. We also added T-molding.

Intermission

Multi-Pac Lit

Multi-Pac Front

Step 5: Assembled everything. Added new fluorescent (screw-in) lights. This cabinet originally had incandescent bulbs. The picture on the left shows the incandescent bulbs lighting the marquee. The one below shows the fluorescent bulbs behind the marquee.

P003381.jpg (28196 bytes)

Step 6: Brought it in the game room and set it on free play.

P003380.jpg (31679 bytes)

Multi-Pac CP

Some pics were taken before the cap kit...

Multi-Pac Menu Ms Pac Fast

The "Jr" boards on Ms Pac-Man...The monitor still needs a little adjustment...

P003377.jpg (33167 bytes) P003378.jpg (25786 bytes) P003379.jpg (23607 bytes)

Send email to: appolo@mediaone.net