Williams Multigame Defender Control Panels

Williams MultiGame Defender Control Panels

We have a few control panels available. They are made so that they will take the WMG overlays from Phoenix Arcade.

The panels are made of plywood similar to the original Defender control panels. The front of the panel will be notched to hold the T-molding.
There are T-Nuts mounted in the top of the CP so that the sticks can be machine screwed into the bottom of the panels. The machine screws are provided.
There are routed-out holes for the joystick dust covers, so they can ride under the CPO with a piece of Plexiglas over the control panel. This gives the panel the feel of an original Williams Defender control panel. The overlay is applied to the Plexiglas and the Plexiglas mounted to the wood panel with contact adhesive. See Installation Instructions for more information.
These panels are set up for use with leaf switch buttons. If you want to use micro-switch buttons, specify microswitch buttons when ordering.
No latch brackets. We can't find anyone who sells them (yet). You'll need to remove the ones from your existing panel and attach them with wood screws. These may be available later if we can find someone to make them.
No glass-side moldings. These are out of production and are not available. You are welcome to use the one from your Defender panel here as well.

Prices:
Wood Panel with holes & joystick mounting hardware: $55
T-Molding: $5 installed
Shipping depends on location (email for quote) plus some over actual cost to ship for packaging materials and time involved
Check (hold until clear), Money Order, or PayPal (appolo@appolo.com) accepted

Contacts:

CPO Can be ordered from Phoenix Arcade
Wiring for these (and other Multi-Williams Panels) can be ordered from Mark Spaeth
Latch Brackets: TBD

Final Product after CPO installation with new T- molding, Wico Sticks and Transparent Buttons...